null

ZMR250 Emax RS2205-2300KV LittleBee 20A pro ESC BLHeli OPTO frame Carbon Fiber RTF Combo Full Set FPV QAV210

Write a Review
Was: $399.99
Now: $379.99
failed_validation:
true
google_product_category:
2082
Adding to cart… The item has been added

Product Overview


Description
The Mini Quad is a low weight Mini Sport FPV Quadcopter frame.
It was designed to make use of standard sized electronic equipment commonly used in RC.
This allows the quadcopter to compete with larger quadcopters, while being smaller and agile !
Working on Mini Quadcopters requires a lot of soldering, wire shortening and creation of power distribution systems.
This product requires a good knowledge of RC systems and is not recommended for beginners.
Specifications
Materials: Carbon Fiber
Fasteners: Stainless Steel & Red Metal 8/8
Size: 220mm diagonally, 175mm wide, 130mm long motor-to-motor; about 1/2 the size of a regular quadcopter
Maximum Propeller: 5"
Motor Mount: M2 12mm - 16mm (Tiger MN1806 2300kv, RCX 1804 2400kv), M3 19mm (Tiger MT2206 2000kv, Sunnysky X2204 2300kv)
Flight Controller Mount: 30.5mm x 30.5mm
Board Camera Mount: 32mm x 32mm
Suggested Components
Motors: 1806 "Blackout 3S" 2300kv Motor
Propeller: 5x3
ESC: 12amp SimonK ESC
Battery: 3S 1300mah
Flight Controller: MW,KK, Naze32, Flip Pro
Package:
100% NEW
1set*QAV250 Carbon Fiber Mini FPV Quadcopter Frame
 
 

Emax RS2205-2300KV

Brands: Emax
Model: RS2205-2300
Framework: 12N14P
No. of Cells: 3 - 4S
Color: Red
Length: 31.7mm
Shaft: M5
KV: 2300
Max Thrust: 1024g
Diameter: 27.9mm
Propeller Suggested: HQ 5045 BN
Weight: 30g
 
DYS SE2205-2300KV :
Specification:
Brand Name: DYS
Item Name:SE2205 2300KV Brushless Motor
Model:SE2205
KV: 2300kv
Pull:1070g
Motor Size:Φ27.7×19
Shaft Diameter: 3mm
Battery: 3-5S LIPO
Max.current: 26.8A
Max.power: 428.8W
Weight: 30g
 
 

 

Littlebee 20a pro :
Specifications:

 

Input: 2-4s Lipo

 

Constant: 20 Amps

 

Burst: 30 Amps

 

Weight: 4g

 

Dimensions: 23x12.5x3mm

 

Motor wire: 70mm

 

Signal wire: 120mm

 

PCB - 4 Layer Blind Pole PCB - 3oz Pour

 

Mosfet: All N channel

 

BEC: None

 

SP RACING F3 (ACRO)
Descriptions: 
Item Name: SP Racing F3 Flight Control for Multicopter Deluxe Version 
Version: Deluxe 6DOF (without MS5611 Barometer and HMC5883 Compass) 
- 36x36mm board, 30.5 mm mounting holes. 
- STM32F3 CPU. 
- High-capacity Flash (Acro 6DOF and Deluxe 10DOF) 
- MPU6050 Accelerometers and Gyroscopes 
- MS5611 Barometer (Deluxe 10DOF) 
- HMC5883 Compass (Deluxe 10DOF) 
- MicroUSB socket. 
- 4 x 4 pin JST-SH Socket (I2C, SWD, 2xuart) 
- 2 x 8 pin JST-SH Socket (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND) 
- 8 x 3 pin though-holes for pin headers for ESC / Servo connections. 
- 2 x 4 pin though-holes for the 2x serial ports . 
- 2 x 2 pin though-holes for battery voltage and buzzer.
 
Features: 
- Better coding practices and introducing tests, easier to maintain and for future development. (Dominic has software development background) 
-Many bugs fixed from Baseflight. Supports more flight controllers, including CC3D, CJMCU and Sparky. 
- Supports OneShot ESC and more than 8 RC channels. 
- Additional PID controllers that uses floating point arithmetic operations. (now has 3 built-in PID Controllers) 
- Many more features such as RGB LED strip support, Autotune, In-flight PID tuning with your radio, blackbox flight data logging etc
 
 
 
Spec 800tvl CCD :
- Size: 26mm*26mm
- Weight:10g
- Lens: 2.8mm
- Pixel: PAL: 1020H×596V (61MP) NTSC: 1020H×508V (52MP)
- Effective Pixel: PAL: 976H×582V (57MP) NTSC: 976H×494V (48MP)
- Format  PAL/NTSC (optional, default PAL)
- Resolution: 800TVL
- DNR:2DNR, support 0-15 class adjustable
- Minimun illuminance: 0.01LUX/F1.2DNR: ≥48dB
- Video ouput: 1.0Vp-p/75Ω
- AGC:  0.25/0.50/0.75/1.00 adjustable, max 55db
- White balance: On/Off
- Explosure: Electric explosure
- Electric shutter1/50(1/60) - 1/100000 
- Working voltage: DC12V
 
Specification:
Item NO.: TS5828L
Modulate: Wideband FM Modulate
Video Format: NTSC/PAL
Output Impedance: 50 Ohm
Output Power: 23-24dBm
Channel: 40 CH
Operating Voltage: 7V-24V
Supply Current: 190mA
Operating Temperature: -10~85°
Video Band Width: 0~8.0 MHz
Audio Carrier Frequency: 6.5 MHz
Video Input Level: 0.8~1.2 Vp-p
Video Input Impedance: 75 Ohm
Audio Input Level: 0.5~2.0 Vp-p
Audio Input Impedance: 10K Ohm
Connector: RP-SMA Female (outer needle)
Antenna Connector, RP-SMA
Dimension: 30mm x 23mm x 8mm
Weight: 7.5g
Features:
40 Channels
600mW RF power output
Smallest and lightest.
 

Description:
Brand: Eachine 

Dimension(mm): 148x176x102
Screen size: 4.3 inch
Screen resolution: 480x272
Working temperature: -20degree-80degree
Ultra-lightweight design: 256g(battery not included)
Battery weight: 24g
Power voltage: 800mah 7.4V standard configuration(2S smart lipo battery, with power display function, supports USB 5V charging)
Antenna: 5.8G 3dB
Power dissipation: 500mA
Frequency channel: built-in 40CH 5.8GHz A/V automatic search receiver
Language choice: multilinguals can be choosed in osd menu(English, French, Italian and so on).

Features:

Small size, light weight.
Designed according to ergonomic.
Settled three-point fillet can reduce the pressure of long-time wear to the head.
High softness, ventilate and environmental sponge fit the contours of the face, more comfortable, less ambient light.
Customized eyeglass, myopia below 400° needn\'t to wear glasses.
Built-in 40CH 5.8GHz A/V automatic search receiver.
Two groups of standard 800mAH 7.4V (2S) Lipo battery, with power display function, supports USB 5V charging, long life.
 
Brand Name: FlySky
Item Name: FS-i6 transmitter
Channel: 6
Model Type: fixed wing/helicopter/glider
Channel resolution: 1024 steps
Low voltage warning: less than 4.2v
ANT length: 26 x 2mm( dual antenna)
Weight: 392g
Battery: 6v 1.5AA x 4(not included)e
Size: 174 x 89 x 190 mm
Color: black
Certificate: CE ,FCC
RF specification:
RF Range: 2.405 - 2.475GHz
Bandwidth: 500khz
RF Power: less than 20dBm
RF mode: AFHDS 2A
Modulation type: GFSK
RX Sensibility: -105dBm