XILO Stax Combo - F4 Flight Controller + 45A BLHeli_32 6s 4-in-1 ESC

  • $ 76.99


The Stax Combo by XILO is a high performance F4 Flight Controller paired with a 45A 32bit 6s 4-in-1 ESC. The plug and play connection makes it easy to install and use on your favorite airframe

Stax F4 Flight Controller Version 1.1 update!

  • Spacing for receiver pins (XM+/Crossfire Nano) is now correct!
  • 16MB onboard flash for Blackbox

The Stax Combo continues XILO's tradition of giving you high-quality FPV gear for a low price point. And it couldn't be easier to install and use on your favorite airframe!

Remove the mess of soldering and the chance of making a mistake during build time. The Stax plug n' play capability allows you to simply connect the FC and ESC with the included 8pin harness, simply wire up your motors and accessories, and you are good to go!

The F4 flight controller gives you proven rock solid processing power while the ICM20602 Gyro/Accelerometer (Up to 32KHz) gives accurate gyro information while in use. The 4-in-1 ESC uses F3 processing power to allow complex power management without a hitch. The ESC supports up to 6S input voltage while 45 amps continuous support gives you plenty of headroom to push your mini quads to the limit.

The XILO Stax FC has the unique ability to mount XM+ and Crossfire Nano style receivers directly to the FC. This saves space and makes for an overall cleaner build. If you are using a "slammed" style frame, this feature is very handy as the receiver won't add any additional height to your stack.

Another key feature on the Stax FC is the remote VTX power switch. With the XILO Stax flight controller, you are able to map a switch on your radio to turn on or off your VTX. This is useful when you are plugging in and don't want to broadcast video signal or you crashed your quad and want to prevent a roasted VTX. When a video transmitter isn't in flight it can quickly overheat due to lack of air flow, and this ability to control power can save you many burnt up VTXs.

The Stax uses standard 30.5x30.5 mounting hole configuration. The FC and ESC include M3 silicone mounting grommets to reduce vibrations to your gyro, ensuring accurate readings.

Other features such as OSD, telemetry, multiple UARTs, 5V pads, SBUS and PPM support, all come standard with the XILO Stax.

Whether you are looking for a stack for a brand new build or just freshen up an older quad, the XILO Stax will get the job done, without breaking the bank.

XILO, affordability redefined.

Software/Hardware Features

 

XILO Stax F4 Flight Controller

Features

  • 2-6S Direct Lipo input support (5-26v)
  • On-board BetaFlight OSD
  • VTX Remote Power switch
  • On-board 5v/2A and 3.3v/0.2A regulators
  • SBUS and PPM support
  • RGB LED dedicated pad
  • VBAT Monitoring support
  • 16MB Flash for Blackbox
  • 6x UART Ports
  • Betaflight support (Supports DSHOT protocol)
  • BLHeli pass-through flashing supported by hardware

Specifications

  • STM32F405 (2MB flash) 32-bit processor
  • ICM20602 Gyro/Accelerometer (Up to 32KHz)
  • High quality 1.6mm PCB
  • Micro USB connector for programming
  • Dimensions: 36x36x6mm (includes USB in height)
  • Mounting Holes: 30.5mm square to center of holes
  • Weight: 7g