Matek F405-STD Flight Controller

The Matek F405-STD Flight Controller is an F4 FC with 32K sampling support from the ICM20602 gyro connected through SPI. It has an SD card slot to log all the data you want. In addition to working with Betaflight, this flight controller is also fully compatible with iNav.

Pairs perfectly with the Matek FCHUB-6S PDB for a truly 6s compatible stack, all with just an FFC connection, no soldering. 

Features

• 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
• 6x PWM / DShot outputs without conflict
• 2x 2812LED outputs option
• 5x UARTs
• 1x Group of 5V/G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
• 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
• 1x pair I2C1 pads
• 1x Side-press button for BOOT(DFU) mode
• 1x 16pin bottom mounted FFC Slot for FCHUB-6S, FCHUB-VTX or FCHUB-W connection
• 36x36mm PCB with 30.5mm mounting holes

Specifications

• MCU: 168MHz STM32F405RGT6
• IMU: 32K ICM20602 gyro/accelerometer (SPI)
• Baro: BMP280 (I2C)
• OSD: BetaFlight OSD w/ AT7456E chip
• Blackbox: MicroSD card slot (SD/SDHC)
• VCP, UART1, UART2, UART3, UART4, UART5
• Built-in inverter for SBUS input (UART2-RX)
• PPM/UART Shared: UART2-RX
• SoftSerial on TX2, S5 or S6 optional
• Camera control on S6 or DAC optional
• SmartAudio & Tramp VTX protocol supported
• Battery Voltage Sensor: 1:10
• Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
• BEC 5V: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
• LDO 3.3V: Max.300mA
• I2C1 SDA & SCL: Yes
• WS2812 Led Strip: Yes
• Beeper: Yes
• RSSI: Yes

Includes

• F405-STD Flight Controller
• w/ 2x 0.5mm*16Pin 5cm Flexible Flat Cable
• w/ 4pcs M3 Anti-vibration Standoffs